IS THE 2'x2' RIGHT FOR YOU?
Full Capability in a Compact Package.
IDEAL FOR:
SMALLER MOLDS & PARTS
The 2'×2' is our smallest and most economical standard rotational casting machine. It provides the same independent, variable-speed biaxial rotation as our larger machines in a compact, bench-mounted design.
If your molds don't require the capacity of a larger machine, the 2'×2' provides professional rotational casting capability while minimizing both floor space and initial investment.
A practical choice for applications that don't require the additional mold capacity of our larger machines.
LIMITED SHOP SPACE
Its compact size makes it easier to position, move, and accommodate within your shop.
PROTOTYPE & LIMITED RUNS
Well suited to prototypes, one-off projects, product development, and lower-volume production runs.
WILL YOUR MOLD FIT?
NOT SURE IF YOUR MOLD WILL FIT?
Mold size, shape, weight and mounting position can all affect fit. Send us your mold dimensions and weight and we'll help you determine the right machine for you.
The 2'×2' inner frame (gimbal) has a 20"×20" internal opening, with additional mounting area available on the flat surfaces of the L-shaped frame. This allows molds to be mounted across an area up to 24"×24".
Longer molds up to approximately 28" may also fit when positioned diagonally, provided their shape and mounting position allow them to clear the outer frame throughout rotation.
Mold Capacity
INTERNAL GIMBAL OPENING
20" x 20" (51 x 51 cm)
MAXIMUM MOLD MOUNTING AREA
24" x 24" (61 x 61 cm)
MAXIMUM DIAGONAL MOLD LENGTH
Approx. 28" (71 cm)
MAXIMUM BALANCED MOLD WEIGHT
200 lbs (91 kg)
MAXIMUM UNBALANCED MOLD WEIGHT
50 lbs (23 kg)
HOW IT WORKS
INDEPENDENT CONTROL ON BOTH AXES
The 2'×2' uses separate variable-speed motors for the main and inner rotations, allowing each axis to be adjusted independently for the requirements of your mold and casting material.
MAIN ROTATION
0-10 RPM
Motor
¼ HP DC Variable Speed
Direction
Forward / Stop / Reverse
Control
Independent
INNER ROTATION
0-27 RPM
Motor
¼ HP DC Variable Speed
Direction
Forward / Stop / Reverse
Control
Independent
Both axes
VARIABLE SPEED
Main & inner rotation
INDEPENDENT CONTROL
Automatic ramping
SOFT START / STOP
Operator Control
EMERGENCY STOP
INSTALLATION REQUIREMENTS
WHAT YOU'LL NEED
The compact 2'×2' requires minimal shop space and standard electrical service, making it easy to integrate into most production environments.
POWER
120V / 60Hz
15 Amp
Operates from a standard grounded electrical receptacle without specialized power requirements
SPACE
54" x 32"
138 x 82 cm
Compact, bench-mounted design with minimal floor-space requirements.
SETUP
Ready To Run
Minimal setup required
Position the machine, connect power, mount your mold, and you're ready to begin.
PRICING & WHAT'S INCLUDED
What to Expect When You Order
PRICING & ORDERING
The 2'×2' machine is supplied ready for installation, backed by lifetime technical support from Mannetron.
$7,500
2'x2' ROTATIONAL CASTING MACHINE
Crating Included
SHIPPING
Buyer Arranges Freight
Your machine is crated by Mannetron. You arrange pickup and delivery with a freight carrier of your choice.
Shipping Terms
FOB Shipping Point - Freight Collect
PAYMENT
Payment Terms
50% deposit with purchase order; 50% balance prior to shipment.
Payment Methods
Check, ACH, or credit card. Credit card payments are subject to processing fees.
WHAT'S INCLUDED:
2'x2' ROTATIONAL CASTING MACHINE
Complete machine and controls, ready for installation.
CRATING
Machine is prepared and crated for freight shipment.
DIGITAL OPERATING MANUAL
Operating, setup, and reference information provided electronically.
LIFETIME TECHNICAL SUPPORT
Phone and email support from Mannetron for as long as you own the machine.
AVAILABLE OPTIONS
Safety Mat Integration
An integration point for a customer-supplied safety mat can be added upon request.
International Power Configuration
For machines shipping outside the U.S., we can configure the machine for local power requirements with the appropriate transformer and plug.
Additional charges apply. International orders may also require upgraded export-grade crating at additional cost.
WARRANTY, SUPPORT & RESOURCES
BACKED BY MANNETRON
ONE-YEAR WARRANTY
Mannetron workmanship and components manufactured by us are covered for one year from purchase.
Manufacturer warranties on purchased components are passed through to the customer.
LIFETIME SUPPORT
Phone and email technical support is available for as long as you own your machine.
DOCUMENTS & RESOURCES
Resources
Videos, articles, FAQs and more
COMING SOON
READY TO GET STARTED?
Let's Talk About Your Project.
Tell us about your mold, application and production needs. We'll help determine whether the 2×2 is the right machine for you.